Asus PS4 User Manual
Page 38
Advertising
Chapter 2: Hardware setup
2-20
The heatsink on PIKE 1078/PIKE 2008 Series might interfere the components
on the expansion card. Ensure that the height of the components is less than
5.8 mm.
10. Set the SGPIO_SEL1 jumper on
the backplane to pin 2-3 when
connecting data cables to the SAS
connectors on the motherboard.
9. Connect the SGPIO cable to
the SGPIO1 connector on the
motherboard.
Advertising
This manual is related to the following products: