Asus PS4 - Manual (Page 82)

5-18 Chapter 5: BIOS setup
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
ECC Configuration
ECC Mode [Basic]
DRAM ECC Enable [Enabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Set the level of ECC
protection. Note: The
‘Super‘ ECC mode
dynamically sets the
DRAM scrub rate so
all of memory is
scrubbed in 8 hours.
ECC Mode [Basic]
Disables or sets the DRAM ECC mode that allows the hardware to report and
correct memory errors.
Configuration options: [Disabled] [Basic] [Good] [Super] [Max] [User]
ECC Configuration
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
DRAM Timing Configuration
DRAM Timing Config [Auto]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
DRAM Timing Config [Auto]
Allows you to select the DRAM timing mode. Configuration options: [Auto] [Manual]
DRAM Timing Configuration
Options
Auto
Manual
Memory Clock Speed [400 MHz]
This item appears only when you set the DRAM Timing Config item to
[Manual] and allows you to set the memory clock frequency.
Configuration options: [400 MHz] [533 MHz] [667 MHz]
Memory Timing Parameters [CPU Node 0]
Allows you to select which node's timing parameters to display.