Airlink APSUSB2 User Manual
Page 2
Advertising
Step 1
Connect one end of the Ethernet cable to the RJ-45 port of the Print Server
and attach the other end of the cable to a hub/switch/router. See Fi g 1.1
Step 2
Make sure all the printers are powered OFF, then connect one end of the
printer cable to the printer port of the Print Server and attach the other end of the cable
to the printer port of the printer. Repeat this process for each printer on your network.
Step 3
Turn ON the printer(s).
Step 4
Plug one end of the power cord into the Print Server and the other end into an
electrical outlet.
Connecting the Print Server to your network
Section 1
Warning: Do not plug the power cord to the Print Server until you have reached Step 4.
Fig. 1.1
Advertising