Airlink APSUSB2 - Manual (Page 8)

Step 8 Select LPR for the Protocol, enter
the Port Name in the Queue Name field,
and click OK. See Fig. 4.5
Step 9 Click Next.
Step 10 Click Finish.
Fig. 4.5
Step 11 Select the manufacturer and
model of your printer and click Next.
Note: If your printer is not on the list, click
Have Disk, insert the printer driver disk
that came with your printer, and click Next.
See Fig. 4.6
Step 12 If a driver for the printer is already
installed, select Keep existing driver and
click Next.
Fig. 4.6
Step 13 Type in a name for your printer
and click Next. For Windows 2000, select
if you want to set this printer as the default
printer. See Fig. 4.7
Step 14 Select if you want to print a test
page and click Next.
Step 15 Click Finish.
Fig. 4.7