Canon TS-E 24mm f3.5L II - Manual (Page 13)

ENG-12
Using Shift
Turn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot. Loosen the shift lock knob
by turning it in the direction
of the arrow. Turn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
When you shift the lens, sharp portions of the shift mechanism are exposed and care should be taken to
avoid touching these portions. For EOS cameras with built-in flash, there may be contact with the lens while
you operate the shift function.
● With large amounts of shift, the amounts of peripheral light at the top and bottom or left and right sides of
the screen may differ, so shooting with a small aperture is recommended.
● The shift operation will be easier if the supplied cap is mounted on the shift knob (p.6).
TS-E 24mm
CANON
LENS
TS-E
24 mm
02-7587_ENG 10.2.10 3:48 PM Page 12
COP
Y