Canon TS-E 24mm f3.5L II - Manual (Page 18)

ENG-17
10. Hood
(TS-E24mm f/3.5L II)
The EW-88B lens hood can keep unwanted light out of the lens, and also protects the lens from
rain, snow, and dust.
To attach the hood, align the hood’s attachment
position mark with the red dot on the front of the lens,
then turn the hood as shown by the arrow until the lens’
red dot is aligned with the hood’s stop position mark.
The hood can be reverse-mounted on the lens for
storage.
When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not
grasp the rim of the hood to turn it.
● Cutting off harmful rays entering the lens by using both a hood as well as a piece of cardboard is
recommended.
● A hood is not available for TS-E17mm f/4L.
TS-E 24mm
CANON
LENS
TS -E 24mm
TS-E 24mm
CANON
LENS TS-E 24m m
02-7587_ENG 10.2.10 3:48 PM Page 17
COP
Y