Canon EOS-1D C - Manual (Page 72)

72
Troubleshooting Guide
To shoot still photos during movie shooting, using a card with a higher
performance than the “Required Card Performance” on page 17 is
recommended.
Setting a smaller image size for the still photos and shooting fewer
continuous shots may resolve the problem.
Set [z5: Movie shoot. btn] to [o].
You cannot shoot still photos during movie shooting if any of the
following is set: Canon Log gamma,
H , I , A : 8 / 7 .
Since the image circle of EF Cinema zoom lenses does not support
the image size of 35mm full-frame size image sensor, still photo
shooting is not possible. (The image periphery will look dark.)
If you want to apply lens aberration correction when using an EF
Cinema lens (p.29), use EOS Utility (provided software) to register the
correction data to the camera. If EOS Utility’s correction data
registration screen does not show the EF Cinema lens, update EOS
Utility to the latest version.
Check that the [Lens aberration correction] menu is set to
[Correction data available]. If [Correction data not available] is
displayed, use the provided EOS Utility software to register the lens’
correction data to the camera (
z
p.155-157).
When you shoot a still photo using an EF Cinema lens, lens aberration
correction is not applied. The lens aberration correction is applied only
during movie shooting. Peripheral illumination correction, distortion
correction, or chromatic aberration correction of RAW images shot
with an EF Cinema lens will not be possible when the RAW image is
processed (
z
p.290).
When I shoot still photos during movie shooting, the movie
shooting stops.
I cannot shoot still photos during movie shooting.
Lens aberration correction is not applied.