Canon EOS-1D C - Manual (Page 74)

74
Troubleshooting Guide
When Canon Log gamma is set and [Peripheral illumin.] is set to
[Enable], Canon Log gamma icon on the information display screen
blinks, since noise may appear in the movie image periphery.
AF is not possible when Canon Log gamma is set.
If
H
,
I
or
A
:
8
/
7
is set, AF is not possible in the f mode.
Even if the AF mode is set to f, it will switch to d during movie
shooting.
If the movie-recording quality’s frame rate setting is set to a value that
does not function properly in combination with the NTSC/PAL frame
rate, the time code will not be appended to the HDMI output image.
When the movie shooting ends, the HDMI output image pauses (frame
stop). When writing to the card is completed, the movie is output
normally.
If you connect or disconnect the HDMI cable during movie shooting,
the movie shooting will stop. If you shoot movies while using HDMI
output, you should use the provided Cable protector and clamp to
prevent the cable from disconnecting accidentally.
Canon Log gamma icon blinks.
AF is not possible.
The time code cannot be appended during HDMI output.
The HDMI output image has a temporary frame stop.
Movie shooting stops if I connect or disconnect the
HDMI cable.