Canon PIXMA iX6850 User Manual
Page 46
* All lamps are shown lit in the above figure for explanatory purposes.
(7) RESUME/CANCEL button/Alarm lamp
Press to cancel a print job in progress. This lamp lights or flashes orange when an error occurs. You
can press this button to release from printer error status and resume printing, after the printer problem
is resolved.
Note
• You can check the status of the printer by the POWER and Alarm lamps.
• POWER lamp is off: The power is off.
• POWER lamp lights white: The printer is ready to print.
• POWER lamp flashes white: The printer is getting ready to print, or printing is in progress.
• Alarm lamp flashes orange: An error has occurred and the printer is not ready to print.
• POWER lamp flashes white and Alarm lamp flashes orange alternately: An error that requires
contacting the service center may have occurred.
(8) ON button/POWER lamp
Press to turn the power on or off. This lamp lights white after flashing when the power is turned on.
(9) Wi-Fi button/Wi-Fi lamp
Hold down to automatically set up the wireless LAN connection.
Lights or flashes blue to indicate the wireless LAN status.
Lights:
Wireless LAN connection is enabled.
Flashes:
Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN
connection.
46