Using an assignable button 93, Cop y – Canon LEGRIA HF G30 User Manual
Page 93
Assignable Buttons
93
Options
* Even if this function is assigned to an assignable button in
or
mode, the button will be
disabled if you set the camcorder to
mode.
Using an Assignable Button
After you assign a function to one of the buttons, press the button to activate the function.
[
È
Powered IS]*
Turns Powered IS on/off (A 60).
[
°
BLC Always On]*
Turns backlight correction on/off (A 66).
[
~
Face Only AF]*
Turns face only autofocus on/off (A 54).
[
¦
Video Snapshot]
Turns video snapshot on/off (A 87).
[
Ä
WB Priority]*
Turns white balance priority on/off (A 150).
[
z
Pre REC]
Turns pre-recording on/off (A 88). Default setting for assignable button 2.
[
AF/MF]*
Switches between autofocus and manual focus (A 51). Default setting for assignable
button 1.
[
Rec Review]
Reviews the last scene that was recorded (A 43). Default setting for
assignable button 5.
[
Rec. Programs]*
Functions the same as selecting [Rec. Programs] (A 62, 64, 69) in the
FUNC. panel.
[
BLC Always On]*
Functions the same as selecting [° BLC Always On] (A 66) in the FUNC.
panel.
[
White Balance]*
Functions the same as selecting [Ä White Balance] (A 67) in the FUNC.
panel.
[
AGC Limit]*
Functions the same as selecting [x AGC Limit] (A 61) in the FUNC. panel.
[
Focus]*
Functions the same as selecting [< Focus] (A 51) in the FUNC. panel.
[
Exposure]*
Functions the same as selecting [y Exposure] (A 64) in the FUNC. panel.
[
Audio Scene]
Functions the same as selecting [— Audio Scene] (A 79) in the FUNC.
panel.
[
Mic Level]*
Functions the same as selecting [ä Mic Level] (A 80) in the FUNC. panel.
[
Zoom]
Functions the same as selecting [R Zoom] (A 56) in the FUNC. panel.
[
Image Stabilizer]*
Functions the same as selecting [Image Stabilizer] (A 60) in the FUNC.
panel.
[
Image Effects]*
Functions the same as selecting [Image Effects] (A 71) in the FUNC. panel.
[
Wi-Fi Remote]
Functions the same as selecting [„ Wi-Fi Remote] (A 120) in the FUNC.
panel.
[
j Off]
Does not assign a function to the assignable button. Default setting for assignable
button 3 and assignable button 4.
COP