Canon LEGRIA HF G30 - Manual (Page 94)

Saving and Loading Menu Settings
94
Saving and Loading Menu Settings
After you adjust the cinema-look filters and other settings in the FUNC. panel and setup menus, you
can save those settings on a memory card. You can load those settings at a later date or on another
HF G30 camcorder so that you can use that camcorder in the same way.
Saving Menu Settings to a Memory Card
Menu settings must be saved to memory card 3. If the memory card already has menu settings on it,
they will be overwritten.
1 Insert a memory card into memory card slot 3.
2 Open the [Backup Menu Settings 7 ] screen.
[FUNC.] > [MENU] > q > [Backup Menu Settings 7]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
3 Touch [Save] and then touch [Yes].
• The current settings are saved to the memory card.
4 Touch [OK] and then touch [X].
Loading Menu Settings from a Memory Card
1 Insert a memory card with menu settings into memory card slot 3.
2 Open the [Backup Menu Settings 7 ] screen.
[FUNC.] > [MENU] > q > [Backup Menu Settings 7]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
3 Touch [Load] and then touch [Yes].
• After the camcorder’s current settings are replaced with the settings saved on the memory card,
the screen will turn black momentarily and the camcorder will restart.
Operating modes:
COP
Y