Canon REALIS WUX10 MARK II D - Manual (Page 113)

113
Setting Network
Co
nnecting the Projector
to Netwo
rk
6
Click [Projector info] and enter the projector name.
• You can input 1 to 63 alphanumeric characters.
• The factory default is [WUX10 MarkII].
7
Click [Location], enter the projector location, and click the [OK] button.
• You can input up to 63 alphanumeric characters.
• The factory default is blank.
8
Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network setting of the projector is now completed.
If you want to test the error report transmission, click [Send test mail].
• Filter message: it tells that the air filter has reached its replacement tim-
ing.
• Unknown: it tells that an unknown error was occurred.
Make sure to install the SNMP manager program on your PC before using the SNMP
agent function.
Authentication and Encryption Protocols
SNMP V3 for the projector uses the DES-CBC for the authentication and encryption
protocols.