Canon REALIS WUX10 MARK II D User Manual
Page 58
Selecting Screen Aspect and Aspect
58
4
Use [ ] / [ ] to select a screen aspect type.
16:10
Select this when you use a screen with aspect ratio of
16:10. Also, select this when you project an image on
a wall.
16:9
Select this when you use a screen with aspect ratio of
16:9.
4:3
Select this when you use a screen with aspect ratio of
4:3.
16:9 D. image shift
Select this when you use a screen with aspect ratio of 16:9. Suitable for projecting
visual software having aspect ratio of 16:9.
You cannot correct the keystone distortion in this mode, but you can move the image
up or down with images being projected horizontally.
See the following page on how to shift the image.
4:3 D. image shift
Select this when you use a screen with aspect ratio of 4:3. Suitable for projecting
visual software having aspect ratio of 4:3.
You cannot perform the keystone adjustment in this mode; however, you can move
the image to the left or right while projecting the image horizontally.
For the details on how to move the image, refer to the page
5
Press the OK button to accept your setting and then press the MENU button.
<
<
Remote control
Top control