Setting up the screen automatically, Auto setup – Canon REALIS WUX10 MARK II D User Manual

Page 47

Advertising
background image

47

Proje

cti

ng

an
Im

age

Setting Up the Screen Automatically

Auto Setup

The auto setup function automatically makes the following settings and adjustments.

Use the auto setup function when:
• You turned the power on and the countdown sequence was completed.
• You changed the position or angle of the projector during the projection process.

Setting image input signal (Auto input)

Focusing (Auto focus)

Keystone correction (Auto keystone)

Screen color correction (Auto screen color correction)

• The auto screen color correction is disabled at the factory. To enable the auto screen color

correction when performing the auto setup, select the function in menu. (

P82

)

• You cannot set a digital PC signal or an AV equipment signal ([Digital PC] and [HDMI])

with the auto setup function. Select the appropriate signal by pressing the INPUT button.
(

P50

)

• When "No signal" message appears, press the INPUT button to select an appropriate

input signal. (

P50

)

• If focusing, keystone distortion and/or screen color correction have not been performed

properly, manually adjust them. (Adjusting the focus:

P54

, Correcting keystone distortion:

P55

and Correcting the screen color:

P82

)

• If you select [16:9 D. image shift] or [4:3 D. image shift] for [Screen aspect], [Auto setup]

will be disabled and the following screen appears.

• When you press the INPUT button and then the AUTO SET button, only the input signal

type is set.

• When you press the FOCUS button and then the AUTO SET button, only the focus is

adjusted. If you select [16:9 D. image shift] or [4:3 D. image shift] for [Screen aspect], the
auto focus function will be disabled.

• When you press the D.SHIFT/KEYSTONE button and then the AUTO SET button, only the

keystone distortion is adjusted. If you select [16:9 D. image shift] or [4:3 D. image shift] for
[Screen aspect], the keystone adjustment will be disabled.
The keystone adjustment is not performed under the some other conditions. For the
details, refer to the page

56

.

Advertising
This manual is related to the following products: