Canon REALIS WUX10 MARK II D - Manual (Page 75)

75
Setting Up Functions fr
om
Menu
s
Setting Display Status
Selecting an Image Projection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of image.
(
P61 )
• Different contents are displayed for dif-
ferent screen aspects or input signal
types.
• The ASPECT button on the remote con-
trol can also be used to select the
Aspect settings.
Press the OK button to accept your setting
and then press the MENU button.
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Auto An image is projected at an aspect
ratio of the input signal. Select this
mode for normal image projection.
Full An image is projected at an aspect
ratio of 16:10.
Select this to project computer
screen images having an aspect
ratio of 16:10 (WUXGA, WSXGA+,
WSXGA, and WXGA (1280 x 800))
fully on the screen.
16:9 An image is projected at an aspect
ratio of 16:9. Select this if an image of
16:9 aspect ratio cannot be appropri-
ately projected in the [AUTO] mode.
Aspect
Display settings
4:3 An image is projected at an aspect
ratio of 4:3. Select this if an image of
4:3 aspect ratio cannot be appropri-
ately projected in the [AUTO] mode.
Zoom An image with 4:3 aspect ratio is pro-
jected in the center of the screen
enlarged in 16:9 aspect ratio with the
upper and lower portion of the image
cut off. Select this when projecting
visual software having aspect ratio of
4:3 and black belts at the top and
bottom of the image.
• This mode is available when you
select [16:10], [16:9] or [16:9 D.
image shift] for [Screen aspect]
and select [HDMI (480p)], [COM-
PONENT (480p, 480i)] or [VIDEO]
for input signal.
True size An image is projected with the origi-
nal resolution of the input signal.
Select this to clearly project a com-
puter screen image having a resolu-
tion of WUXGA or lower.
• This mode is available when you
select [ANALOG PC-1], [ANALOG
PC-2] or [DIGITAL PC] for input
signal.
• This mode is also available when
you select [HDMI (480p, 576p,
720p, 1080i, 1080p)] and [COM-
PONENT (480p, 576p, 720p,
1080i, 1080p)] for input signal.
1080i and 1080p are unavailable
when [4:3] or [4:3 D. image shift] is
selected for [Screen aspect].
[Auto] and [True size] are not available if
the input signal type is [VIDEO].