Canon REALIS WUX10 MARK II D - Manual (Page 76)

Setting Display Status
76
Selecting an Input Signal Type (ANALOG
PC)
[Input signal select]
You can select a proper resolution if auto
PC adjustment function (
P52 ) cannot
project a correct image from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
• For the signal types supported by the
projector, see the table on page 130 .
Selecting an Input Signal Type (VIDEO)
[Input signal select]
You can select a proper signal type if a
video image from your AV equipment is
not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
equipment connected to the projector to
confirm the input signal type.
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Input signal select
Display settings
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Input signal select
Display settings