Canon REALIS WUX10 MARK II D - Manual (Page 79)

79
Setting Display Status
Setting Up Functions fr
om
Menu
s
Adjust Input Signal (ANALOG PC) – Vertical
position
[Input signal settings] - [Vertical position]
You can adjust the vertical position of the
screen when the projected image is
shifted in the vertical direction.
Use [<] / [>] to select a value. As the value
increases, the screen moves upward.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function ( P52 ) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
Adjust Input Signal (ANALOG PC) – Hori-
zontal pixels
[Input signal settings] - [Horizontal pixels]
You can adjust the number of the pixels in
the horizontal direction if the length of the
screen is too long or too short in the hori-
zontal direction.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function ( P52 ) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Input signal settings
Display settings
Vertical position
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Input signal settings
Display settings
Horizontal pixels