Canon REALIS WUX10 MARK II D - Manual (Page 85)

85
Setting Display Status
Setting Up Functions fr
om
Menu
s
Selecting a Logo at Startup
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
• [Canon logo] is the factory default.
Selecting Aspect Ratio of Screen
[Screen aspect]
You can select proper option corresponding to
the aspect ratio of the projecting screen. (
P57 )
Press the OK button to accept your setting
and then press the MENU button.
• [16:10] is the factory default.
• If you select [16:9 D. image shift] or [4:3
D. image shift], the keystone adjustment
will be reset. For more details, refer to
the page
58 .
• [Auto] may be automatically selected for
[Screen aspect] depending on the
screen aspect setting.
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Skip Projects an input signal immedi-
ately after turning on the projec-
tor.
Canon logo Displays the Canon logo cap-
tured at the factory.
User screen settings
Display settings
Projector on
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
16:10 Select this when you use a screen
with aspect ratio of 16:10.
16:9 Select this when you use a screen
with aspect ratio of 16:9.
4:3 Select this when you use a screen with
aspect ratio of 4:3.
16:9
D. image
shift Select this when you use a screen
with aspect ratio of 16:9.
You can move the screen upward or down-
ward with D.SHIFT/KEYSTONE button.
4:3
D. image
shift Select this when you use a screen
with aspect ratio of 4:3.
You can move the screen to the left or right
with D.SHIFT/KEYSTONE button.
Screen aspect
Display settings