Canon REALIS WUX10 MARK II D - Manual (Page 93)

93
Setting the Image Quality
Setting Up Functions fr
om
Menu
s
An Example of the Ambient Light Setting
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
• You can set this if you have selected
[Photo] for [Image mode].
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
You can enable or disable this mode also
with the LAMP button on the remote con-
trol.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The setting you have made is stored as
a setting value of input signals being
projected in an image mode.
Level L Select this if the ambient light
source is a light bulb or bulb color
fluorescent.
M Select this if the ambient light
source is a day white fluorescent.
H Select this if the ambient light
source is a daylight fluorescent.
Level Example Location
L A projection room, bar
M Photo studio, galley
H Conference room, lecture room
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Normal Projects an image at the normal bright-
ness level.
Quiet Reduces the lamp brightness and cool-
ing fan noise.
Lamp mode
Image adjustment