Focusing using flexizone-multi, Checking the depth of field and exposure, P.40) – Canon EOS 60DA User Manual
Page 41: Cop y
40
40
Focusing Using FlexiZone-Multi
This AF mode allows focus to be easily achieved on moving subjects.
You can adjust focus over a wide area, and also divide the area into
zones for focusing.
1
Select [FlexiZone-Multi] from the [Focus] list box.
An AF point appears.
You can click in the window to select an AF zone.
To cancel a selected zone, select [FlexiZone-Multi] again from
the [Focus] list box.
You can set continuous AF to on/off with the [Continuous AF]
box. When shooting movies, the [Continuous AF] box changes to
the [Movie servo AF] on/off box.
You can switch between showing and hiding the AF point by
clicking the [
] button.
2
Click the [ON] button on the [Focus] list box.
AF is executed.
When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
If focus is not achieved, the AF point turns red.
The number of AF points and zones depend on the selected
aspect ratio and the image being shot (still image/movie).
REBELT4i
650D
You can check the depth of field and exposure in the [Remote Live View
window].
Click the [ON] button.
The aperture value (exposure simulation) is set in the capture
window
.
Checking the Depth of Field and Exposure
COP
Y