Canon imagePROGRAF iPF9400 - Manual (Page 12)

12
2. ADD THE CUSTOM PAPER TO THE PRINTER WITH
SPECTROPHOTOMETER UNIT MOUNTED
Use the MCT installed on the computer for managing paper to add the custom paper to the
printer with spectrophotometer unit mounted and the printer driver, and then create the
calibration target. Use rolls at least 406.4mm (16 inches) wide for the custom paper. For the
specifications of the custom paper you can use, see P. 7.
Custom paper is added to the printer with spectrophotometer unit mounted by using the following
procedure.
1. Run the MCT (iPF6450 Media Configuration Tool for the iPF6450) for the printer where
the spectrophotometer unit is mounted on the computer for managing paper, and click the
Add and Edit Custom Paper button in the main window.
2. Select the printer with the spectrophotometer unit mounted to use for adding custom paper
in Printer in the Select Printer dialog box, and click the Next button.