Canon imagePROGRAF iPF9400 User Manual
Page 34
34
Item
Corrective Action
Is the message The calibration target in the
media information file is
not up-to-date. displayed in CCMC?
Read the media information file that contains
the latest calibration target information into
the target printer by following the procedure in
"4. ADD THE CUSTOM PAPER TO THE
OTHER PRINTERS" on P. 22.
Is a message recommending that you
execute color calibration displayed in CCMC?
Click the Calibration button in CCMC to
execute color calibration.
Is the wrong paper loaded in the printer?
Replace with the paper configured in the
printer and printer driver.
Is Use Adj. Value in Set./Adj. Menu in the
printer control panel set to Disabled?
Configure the following settings in the
Set./Adj.
Menu in the control panel.
1. Select Calibration from Adjust Printer
and then press the OK key.
2. Select Use Adj. Value and then press the
OK key.
3. Select Enabled and then press the OK
key.
Is Calibration Value in the printer driver set
to Disregard Value or Printer Default?
Open the Paper Detailed Settings dialog
box in the printer driver, and set Calibration
Value to Use Value.
To display the Paper Detailed Settings
dialog box, click Advanced Settings
(Windows) / Set (Mac OS X) in Media Type
in the Main sheet / Main pane.
Are the print modes the same in all of the
printer drivers?
Make the settings the same in Easy Settings
or Advanced Settings in all of the printer
drivers.