Canon Macro Ring Lite MR-14EX II - Manual (Page 28)

26
l Setting the Flash RatioN
Set < 4> or <5>.
Press the < ,> button to display
< _> and <4> or
< _> and <5>.
Single-side Firing
Flash tube
B only Flash tube
A only
Flash ratio control is not available on the models listed below. Both sides will
fire at the same flash output, or single-side firing will apply.
EOS Elan II/Elan II E/50/50E, EOS REBEL XS N/REBEL G II/3000N/66,
EOS REBEL 2000/300, EOS REBEL G/500N, EOS IX, EOS IX Lite/IX 7
The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1 to 1:3 (1/2-
stop increments) when converted to the number of f/stops.
The details of the flash ratio settings are as follows.
When < l>, <4>, or <5> is not displayed, flash tubes
A and B will fire at the same flash output.
When the flash mode is set to <a>, see pages 32-34.
COP
Y