Canon Macro Ring Lite MR-14EX II - Manual (Page 58)

56
q: Wireless Multiple Flash Shooting with Manual Flash Output
4 Set the flash output.
Press function button 3 < 1> or
< 8>.
Turn < 9> to set the flash output,
then press < 8>.
Repeat steps 3 and 4 to set the flash
output for all groups.
5 Take the picture.
X Each group fires at the set flash
output.
If you shoot or fire the test flash with slave A and B positioned when C.Fn-
15-0 is set, slave A and B may fire. Turn off the slave A and B.
When < j> is set with C.Fn-15 set to 1, you can set any of A, B, or C
as the firing group for the slave units. Each group will fire according to the
set flash output.
COP
Y