Canon imagePROGRAF iPF815 MFP M40 User Manual

Page 34

Advertising
background image

34

Error Messages

Error Message

Cause

Corrective Action

GARO Wxxxx (x represents a
number)

There is a problem with the print
job.

Try printing again, using the correct printer driver.

It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.

GL2: Wxxxx The memory is full.
(xxxx is 0501, 0903, or 0904)

The printer memory became full
while processing the job received.

Check the print job and the printing results.

GL2: W0502 The parameter is
out of range.

A parameter specified in a HP-
GL/2 command is out of the
supported range.

Check the print job.

GL2: W0504 This command is
not supported.

The printer has received an
unsupported HP-GL/2 command.

Check the print job.

No ink left.

There is no ink left.

Open the Ink Tank Cover and replace the Ink Tank for
which the Ink Lamp is flashing.

No ink tank loaded.

There is no Ink Tank of the
indicated color in the printer.

Load or reload the Ink Tank .

There is a problem with the Ink
Tank .

Replace it with a new Ink Tank .

Ink insufficient.

The ink level is low, so you cannot
print, clean the Printhead , or do
other operations that require ink.

Replace the Ink Tank that is low with a new Ink Tank .

Not much ink is left.

Not much ink is left.

Prepare a new Ink Tank .
We recommend replacing the Ink Tank with a new Ink
Tank at this point if you plan to print large-format or
high-quantity jobs.

Close Ink Tank Cover The

Ink Tank Cover is open.

Close the Ink Tank Cover .

Wrong ink tank. The

Ink Tank in the printer is

incompatible.

Load an Ink Tank specified for use with the printer.

Ink tank is empty.

There is no ink left in an ink tank.

Open the Ink Tank Cover and replace the Ink Tank for
which the Ink Lamp is flashing.

Remaining level of the ink
cannot be correctly detected.

Ink level detection cannot work
correctly if you use refill ink tanks.

The refill ink tank can no longer be used. See the
section " Ink level detection " and take the appropriate
action.

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

(→"Ink level detection," User Manual)

(→

, Replacing Ink Tanks)

Advertising
This manual is related to the following products: