Ideo system, Powering the camera with household power – Canon PowerShot G1 X Mark II User Manual
Page 186
186
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Movies
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
1
Make sure the camera and TV
are off.
2
Connect the camera to the TV.
z
z
On the TV, insert the cable plugs fully into
the video inputs as shown.
z
z
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
3
Display images.
z
z
Follow steps 3 – 4 in “Playback on a
High-Definition TV” (
) to display
images.
Red
Red
White
Yellow
Yellow
White
•
Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <
n> button and choose [Video
System] on the [
3] tab.
•
Touch-screen operations are not supported while the camera is
connected to a television.
•
When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen. However, AF-Point Zoom (
), MF-Point
Zoom (
available.
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC100 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
z
z
Follow step 1 in “Inserting the Battery
Pack” (
card/battery cover, and then open the
coupler cable port cover as shown.