Shooting raw images, Changing the flash timing – Canon PowerShot G1 X Mark II User Manual
Page 98
98
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
\
Still Images
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
z
z
Press the <
n> button, choose
[Flash Control] on the [
4] tab, and then
press the <
m> button (
).
2
Configure the setting.
z
z
Choose [Shutter Sync.], and then choose
the desired option (
1st-curtain
The flash fires immediately after the shutter opens.
2nd-curtain
The flash fires immediately before the shutter closes.
Still Images
Shooting RAW Images
RAW images are “raw” (unprocessed) data, recorded with essentially no
loss of image quality from the camera’s internal image processing. Use
Digital Photo Professional (
) to adjust RAW images as desired with
minimal loss of image quality.
z
z
Press the <
m> button, choose [ ] in
the menu, and choose the desired option
(
).
Records JPEG images. JPEG images are processed in the camera for optimal
image quality and compressed to reduce file size. However, the compression
process is irreversible, and images cannot be restored to their original,
unprocessed state. Image processing may also cause some loss of image
quality.
Records RAW images. RAW images are “raw” (unprocessed) data, recorded with
essentially no loss of image quality from the camera’s image processing. The
data cannot be used in this state for viewing on a computer or printing. You must
first use the software (Digital Photo Professional) to convert images to ordinary
JPEG or TIFF files. Images can be adjusted with minimal loss of image quality.
For details on resolution and the number of shots that will fit on a card, see
“Number of 3:2 Shots per Memory Card” (
Records two images, both a RAW image and a JPEG image, for each shot.
The JPEG image can be viewed on a computer or printed without using the
software.