Canon LV-8235 UST - Manual (Page 20)

LV-8235 UST Basic Serial Command Specifications
-17-
6.51. Computer 1 Analog RGB Command
Command “C50” [CR]
Detail
Select ANALOG PC in Computer 1 input.
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1/On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.52. Computer 1 RGB (SCART) Command
Command “C51”[CR]
Detail
Select Scart input in Computer1.
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1/On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.53. Computer 1 Component Command
Command “C54”[CR]
Detail
Select Component input in Computer1.
Although projector returns “OK”, Auto input is not executed with this command
while Auto input is set to On1/On2.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.54. AUTO PC ADJ. Command
Command “C89” [CR]
Detail
Execute Auto PC function.
This command works the same as “AUTO PC” button of the remote control.
Sending the command during Auto PC operation stops the operation. This is the
same operation as “AUTO PC” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.55. PRESENTATION TIMER Command
Command “C8A” [CR]
Detail
Execute Presentation Timer.
This command works the same as “P-TIMER” button of the remote control.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]
6.56. KEYSTONE ↑Command
Command “C8E” [CR]
Detail Correct keystone distortion by reducing upper part of image.
Response
Acceptable [ACK] [CR]
Unacceptable “？”[CR]