Canon EOS-1D C - Manual (Page 44)

44
These instructions are continued from Chapter 1.
With EOS Utility, you can use the included WFT Pairing Software to
establish a connection between the camera and a computer.
WFT Pairing Software is installed automatically during easy installation
of the software provided with the camera. If it is not installed, install it on
the computer that will communicate with the EOS-1D X before this
procedure.
The configuration procedure below uses Windows 7 as an example.
1
First, the pairing screen is displayed.
Turn the <5> dial to select [OK].
When you press <0>, the following
message is displayed. ******
represents the last six digits of the
MAC address of the EOS-1D X you
are connecting.
Configuring EOS Utility Communication Settings
COP
Y