Canon imagePROGRAF iPF765 MFP M40 - Manual (Page 678)

Other problems Other problems
The printer does not go on ................................................................................................................................. 678
The printer takes time to start up ....................................................................................................................... 678
If the Printer Makes a Strange Sound ................................................................................................................ 679
Messages advising to check the maintenance cartridge are not cleared ......................................................... 679
The printer consumes a lot of ink ....................................................................................................................... 679
Ink Level Detection ............................................................................................................................................. 679
The printer does not go on The printer does not go on
Cause Corrective Action
The printer is unplugged. Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
(See "Specifications.") →P.708
The printer takes time to start up The printer takes time to start up
Cause Corrective Action
The printer may have shut down incorrectly last time. This may happen af-
ter power outages or if the printer is unplugged before it is turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time. Please wait a while, because it may take several minutes to fin-
ish checking the hard disk.
If an error message is displayed after the hard disk check, follow
the instructions indicated to resolve the problem.
The printer does not go on iPF765
User's Guide
Troubleshooting
Other problems
678