Canon imagePROGRAF iPF9400 - Manual (Page 866)

Level
Shipping Method
(Example)
Permitted Angle of Inclination
Amount of Ink
to Dispose of
Required
Mainte-
nance Car-
tridges( *1 )
3 Tipping the
printer or
holding it up-
right for eleva-
tors or stairs Lengthwise: 0–90º
Rotation: 0–30º Approx.
1,900 ml
(64.3 fl oz) 2 or 3
*1: This is the number of new Maintenance Cartridge required when you execute the Prep.MovePrinter menu. The num-
ber varies depending on the amount remaining in the Maintenance Cartridge being used.
*2: If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, the Maintenance
Cartridge needs to be replaced.
Remove paper
1
Remove the paper.
• Rolls (See "Removing the Roll from the Printer.") →P.539
• Sheets (See "Removing Sheets.") →P.560
Access the Prep.MovePrinter menu
1
If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, replace
the Maintenance Cartridge.
(See "Replacing the Maintenance Cartridge.")
→P.852
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
5
Press ▲ or ▼ to select the level of transfer, and then press the OK button.
6
Press ▲ or ▼ to select Execute, and then press the OK button to display the confirmation screen.
7
Press ▲ or ▼ to select Yes, and then press the OK button.
The printer is now prepared for transfer.
• Level 1
Once preparations are finished, a message on the Display Screen requests you to turn off the printer.
Turn off and pack the printer. There is no need to remove the ink tanks.
(See "Pack the printer.")
→P.869
• Level 2 and Level 3
Preparing to Transfer the Printer iPF9400
User's Guide
Maintenance and Consumables
Other Maintenance
866