Messages regarding printing or adjustment, Cannot execute this command. use other paper, Cannot calibrate – Canon imagePROGRAF iPF9400 User Manual
Page 922: Excessive temperature or humidity
Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. ............................................................................................. 922
Cannot adjust printhead. .................................................................................................................................... 925
Cannot calibrate. ................................................................................................................................................ 922
Borderless printng not possible. ........................................................................................................................ 918
Blue platen switch is dirty. ................................................................................................................................. 924
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause
Corrective Action
Paper compatible with
color calibration is not
loaded.
1.
Press the OK button to clear the error.
2.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide.)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
Cannot calibrate.
Cannot calibrate.
Cause
Corrective Action
The paper for printing a test pattern is soiled. Otherwise,
you have loaded colored paper.
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide.)
The test pattern was printed too faintly.
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause
Corrective Action
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended envi-
ronmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide.)
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibra-
tion. However, note that correct adjustment may not be possible.
Cannot execute this command. Use other paper.
iPF9400
Error Message
Messages regarding printing or adjustment
922