Alpine iDA-X001 - Manual (Page 10)

8
-EN
How to View the Display
<Radio screen display example>
1 Mode display
2 Preset number
3 Volume
4 Tuning mode
5 Frequency
6 RDS indicator
Listening to Radio
1
Press SOURCE/ to select TUNER mode.
2
Press BAND/TA repeatedly until the desired radio
band is displayed.
FM-1 FM-2 FM-3 MW LW FM-1
3
Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) Local (Local mode) Manual (Manual
mode) DX (Distance mode)
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Center Jog Dial to select the preset
number.
4
Press and hold ENT for at least 2 seconds.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM-1, FM-2, FM-3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press BAND/TA repeatedly until the desired radio
band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
“Auto Memory” is displayed while the automatic memory is
in progress. The tuner will automatically seek and store 6
strong stations in the selected band. They will be stored 1 to
6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press BAND/TA repeatedly until the desired band is
displayed.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Center Jog Dial to select a radio station.
4
Press ENT.
The display shows the band, preset number and frequency
of the station selected.
Radio
BAND/TA
TUNE/A.ME PRESET
Center Jog Dial
ENT
SOURCE/
4
5
6
3
1
2