Alpine iDA-X001 - Manual (Page 25)

23
-EN
Turning Mute Mode On/Off (Int Mute)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to Adapter, Int Mute cannot be set. Refer to
“Setting the Bluetooth Connection” (page 22).
• When the Bluetooth box is connected, set Int Mute to Off.
Setting Tone Defeat for External Devices (Int Audio)
When inputting external devices to this unit, turning tone defeat on will
bypass EQ and MX, i.e., sound for external devices is output at the
default setting.
Setting the Changer Name (CHG Name)
When an optional changer is connected, you can set the displayed mode
name.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHG1 Name/CHG2 Name is
displayed, and the setting can be made respectively.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Versatile Link
Terminal (KCA-410C) to this component.
You can change the AUX name display when AUX IN is set to ON.
When AUX IN is set to On, select the AUX Name mode by turning the
Center Jog Dial , then press ENT.
After that, turn the Center Jog Dial to select the desired AUX name,
then press ENT.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/ to select AUX mode and
then press BAND/TA to select your desired device.
Setting the AUX+ Mode
You can input the audio of a connected external device, (such as a
portable player) to the iPod Direct connector of this unit, using an iPod
Direct/RCA Interface cable.
AUX+ Audio Level Adjustment (AUX+ IN GAIN)
Connecting to an External Amplifier (P.IC)
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
Off.
Setting the Language Font
You can select between three types of language fonts.
Demonstration
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
Int Mute On (Initial setting) / Int Mute Off
Int Audio On / Int Audio Off (Initial setting)
CHG (Initial setting)/PMD
AUX IN On / AUX IN Off (Initial setting)
Auxiliary+ On / Auxiliary+ Off (Initial setting)
Auxiliary+ On : Set to On when an external device is connected.
If SOURCE/ is pressed and Auxiliary+ is
selected, the sound of the external device is
input to the unit.
Auxiliary+ Off : Set to Off when an iPod is connected.
High (Initial setting) / Low
Low Decreases the external input audio level
High Increases the external input audio level
P.IC On (Initial setting) / P.IC Off
P.IC Off : Use this mode when the front and rear pre-
amplifiers of the unit are used to drive an external
amplifier connected to the speakers. In this setting,
the head unit’s internal amplifier has no output to
drive speakers.
P.IC On : The speakers are driven by the built-in amplifier.
Language 1 (Initial Setting) / Language 2 / Language 3
Language 1 : Normal Font
Language 2 : European Font
Language 3 : Russian Font
Demo On / Demo Off (Initial setting)
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left