Printer relocation, Preparing to transfer the printer – Canon imagePROGRAF iPF8400S User Manual

Page 76

Advertising
background image

iPF8400S Basic Guide

76

Pr

in

ter
R

el

oca

tion

Pr

epar

ing to Tra

ns

fer

the

P

rin

te

r

Printer Relocation

Preparing to Transfer the Printer

Preparing to Transfer the Printer .................................................................................................................... 76

Reinstalling the Printer ................................................................................................................................... 82

Preparing to Transfer the Printer

To protect the internal parts in transit, always follow these steps before transferring the printer to a
new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.

Important

• Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may

leak and damage the printer if you do not prepare the printer correctly and it is tipped or stood

on end in transit.

Note

• Depending on the state of the printer, part replacement may be necessary when preparing to

transfer the printer (that is, when you execute the printer menu item to prepare for transfer).

• Ink must be drawn into the Maintenance Cartridge before Level 2 or Level 3 printer transfer, as

described in the following table. Prepare the Maintenance Cartridge in advance.

• Always follow the instructions of the service representative when transferring the printer under

Level 3 conditions.

Level

Shipping Method

(Example)

Permitted Angle of

Inclination

Amount of Ink to

Dispose of

Required Maintenance

Cartridges(*1)

1

By truck

Lengthwise: 0–30º

Rotation: 0–10º

0

0(*2)

2

By plane

All directions: 0–30º

Approx. 1.8 L
(60.9 fl oz)

2 or 3

3

Tipping the printer or
holding it upright for
elevators or stairs

Lengthwise: 0–90º
Rotation: 0–30º

Approx. 1.8 L
(60.9 fl oz)

2 or 3

*1: This is the number of new Maintenance Cartridge required when you execute the Prep.MovePrinter

menu. The number varies depending on the amount remaining in the Maintenance Cartridge being
used.

*2: If a message instructing you to replace the Maintenance Cartridge is displayed on the Display

Screen, the Maintenance Cartridge needs to be replaced.

Remove paper

1

Remove the paper.

• Rolls (See "Removing the Roll from the Printer.")➔P.18

Advertising