Canon PowerShot A3500 IS - Manual (Page 104)

104
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Screen Brightness
Adjust screen brightness as follows.
z z Choose [LCD Brightness], and then
press the < q><r> buttons to adjust the
brightness.
• For maximum brightness, press and hold the < p> button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [ 3] tab.) To restore
the original brightness, press and hold the < p> button again for at least one
second or restart the camera.
Hiding the Start-up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z z Choose [Start-up Image], and then
choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
1 Access the [Format] screen.
z z Choose [Format], and then press the
< m> button.
2 Choose [OK].
z z Press the < o><p> buttons to choose
[Cancel], press the < q><r> buttons to
choose [OK], and then press the < m>
button.
3 Format the memory card.
z z To begin the formatting process, press
the < o><p> buttons to choose [OK],
and then press the < m> button.
z z When formatting is finished, [Memory
card formatting complete] is displayed.
Press the < m> button.
COP
Y