Canon PowerShot A3500 IS - Manual (Page 72)

72
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Erasing All Images
You can erase all images at once. Be careful when erasing images,
because they cannot be recovered. However, protected images ( = 70 )
cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
z z Press the < n> button, and then
choose [Erase] on the [ 1] tab ( = 28 ).
2 Choose a selection method.
z z Press the < o><p> buttons to choose
a selection method, and then press the
< m> button.
z z To return to the menu screen, press the
< n> button.
Choosing Images Individually
1 Choose [Select].
z z Following step 2 in “Choosing a Selection
Method” (see above), choose [Select]
and press the < m> button.
2 Choose an image.
z z Once you choose an image following
step 2 in “Choosing Images Individually”
( = 70 ), [ ] is displayed.
z z To cancel selection, press the < m>
button again. [ ] is no longer displayed.
z z Repeat this process to specify other
images.
3 Erase the image.
z z Press the < n> button. A
confirmation message is displayed.
z z Press the < q><r> buttons to choose
[OK], and then press the < m> button.
Specifying All Images at Once
1 Choose [Select All Images].
z z Following step 2 in “Choosing a Selection
Method” ( = 72 ), choose [Select All
Images] and press the < m> button.
2 Erase the images.
z z Press the < q><r> buttons to choose
[OK], and then press the < m> button.
COP
Y