a/d/s/ 245ix - Manual (Page 14)

bi-wire connections to crossover
Connections from the crossover to the woofer and tweeter are the same as the normal wiring method.
Connect the amplifier to the tweeter input terminals with one run of wire. Connect the amplifier to the
woofer input terminals with another run of wire.
NOTE: You must move the selectable switch to the parallel position. Failure to set the switch correctly will
not damage the equipment, but could interfere with any enhancement of the sound due to bi-wiring.
Tweeter
Woofer Amplifer Crossover
IN OUT
+
-
-
+
-
+
-
+
Woofer
Tweeter
Woofer
Tweeter
+
-
+
-
+ -
Bi-Wired
(Switch in Parallel Position)
Bi-amp Parallel
13