AmbiCom WL1100B-AR - Manual (Page 19)

-15-
Upgrade
This item is used for uploading the newest firmware of the WL1100B-AR Wireless LAN
Access Router. You may either enter the file name in the entry field or browse the file by
clicking the Open File button. For information about the release of the newest firmware,
contact your local reseller.
Access Control:
With the Access Control Table enabled, you can authorize wireless units to access the
WL1100B-AR Wireless LAN Access Router by identifying the MAC address of the wireless
devices that are allowed access to transmit data. To create or edit the Access Control Table,
do the following:
Go to the Access Control tab and select “Enable Access Control”. Note that when you
enable the Access Control Table without any MAC address in the table, no access is allowed
to communicate with the WL1100B-AR Wireless LAN Access Router.