AmbiCom WL1100B-AR - Manual (Page 31)

-27-
control table consists of a list for you to control the accessibility of any wireless stations
or repeaters. The sub-commands are listed below:
mode open | allow: set the access control mode. The definition of each mode is specified
as follows:
•
open: open to public (default)
•
restrict: only allow access of the authorized stations/repeaters in the table (no
access is allowed if the list stays empty)
add mac_addr: add an address into the access control table
del mac_addr |index: delete a MAC address, or index an address from the access control
table
list [start/end]: display the content of the access control mode and the address list. The
optional arguments, start and end, can be affixed to select the range of items
to be listed.
clear: clear all the addresses in the access control table.
WEP Keys
wep mode | set | list
The 'wep' command contains sub-commands that allow you to manage the data encryption
(WEP, wired equivalent privacy) function provided with the WL1100B-AR Wireless LAN
Access Router. The sub-commands are listed as follows:
mode disable | wep40 | wep40opt: set the access control mode. The following are the
definition of each data encryption mode.
•
none: no encryption (default)