Apex Digital GB4308 - Manual (Page 20)

18
Instruction Manual
Power On / Off
Plug in the supply socket and press on the projection TV to turn on the projection TV,
and the indicator becomes green.
Press on the remote control, the projection TV is turned off and enters STANDBY
mode .The indicator becomes red.
In the STANDBY mode, press or CH+/- on the remote control or P+/- on the front
panel to turn on the projection TV. The indicator becomes green.
To turn off the projection TV completely, press .
Main power switch button
Power switch button on remote control
Power switch button on remote control
Main power switch button
The indicator flickers when receiving the signal emitted by the remote control (It does’t flicker in
user convergence adjustment mode).
Auto off without signal reception
When a channel has no signal (e.g. the TV station fails to send signals ) and blue background
appears, the projection TV will automatically enter the STANDBY mode if no button is pressed
within 15 min. If Off Time is preset and the time left is less than 15 min., the projection TV will
carry out first the Off Time .
The function of auto -off without signal doesn' t work in the AV mode.
*
*
FEATURES (continued)