Ameriphone AMPLIFIED TELEPHONE - Manual (Page 10)

Insert 4 AA
batteries
here
Press in
here with a
tip of a pen
to open
b tt 4
Setting up Your XL-40
There are five initial steps involved
in setting up your XL-40 for the
first time.
1. Insert four AA alkaline
batteries for back-up in case
of AC power outage.
2. Decide if you want the
phone to sit on a desk or
hang on the wall.
3. Connect the telephone
components.
4. Program up to 12 telephone
numbers to call with the
press of a memory button.
5. Set up special features
Installing the Backup Batteries
If there is a power outage, the
XL-40 will operate for up to 48
hours with four AA alkaline
backup batteries (not included). If
the phone is not in use, the
batteries may last for several months.
To install new batteries:
1. Slide open the battery
compartment cover on the
bottom of the telephone
(Figure 3).
2. Install four fresh batteries. Be
sure to observe battery polarity
as imprinted on the base of
the compartment. The battery
indicator on the top panel
will light up if the batteries
are running low.
The phone operates as a regular
phone if there is no power or battery.
XL-40 Low Battery Indicator Light
If the batteries are weak or not
installed, the Low Battery indicator
will light up. Install fresh batteries
according to the directions above.
E
N
G
L
I
S
H
Figure 3 - Accessing the Batteries
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
Figure 4 - Low Battery Indicator Light