Ameriphone AMPLIFIED TELEPHONE User Manual
Page 27
21
IMPORTANT INSTRUCTIONS
Specifications
Maximum gain
High frequency (3kHz): 40dB
Wide band (300 to 3000Hz):
30dB
Tone control range
Full range: 300 to 3000Hz using
one slide control.
Dimensions
Size: 9
1
/2
" x 7" x 3
1
/4
"
Weight: 2.52 lbs.
Power Requirements
AC Adapter: 9VDC, 300 mA
Batteries: 4 AA alkaline batteries
(not included)
Troubleshooting Chart
The chart below will help you
solve most problems that may
arise during operation of your
telephone. Should the difficulty
continue, contact Ameriphone or
your authorized dealer for
assistance.
CAUSE AND
CORRECTIVE
ACTION
Check all phone
cord connections.
No number stored in
that memory
button. See:
“Programming the
Memory buttons”, P. 10.
See “Setting Up
Your Phone” to reset
the dial mode
switch, P. 5, 6.
1. Check that line
cord is not loose.
2.Check that AC
adapter is
plugged in.
1.Unplug the
AC adapter.
2.Remove backup
batteries.
3.Then, plug in the
AC adapter
and reinstall
batteries.
SYMPTOM
No dial tone
No number
dialed when
memory
button pressed
Call cannot
be dialed,
or dials
very slowly
Call comes in
but phone
does not ring.
Phone locks up.
No
functions
operate