Electronic control settings, User preferences, Adjusting oven temperature – Electrolux EW30DS65GS User Manual

Page 37: Setting time of day display — 12 or 24 hours, Setting clock display — on or off, Changing between 12 or 24 hour time of day display, Changing clock display between on and off

Advertising
background image

37

Electronic Control Settings

useR PRefeRences

(continued)

adjustinG oVen teMPeRatuRe

The temperature in the oven has been pre-set at the factory. When first using the oven, be

sure to follow recipe times and temperatures. If you think the oven is too hot or too cool,

the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a

temperature setting that is higher or lower than the recommended temperature. The baking

results should help you to decide how much of an adjustment is needed. Each oven can be

individually adjusted.

To adjust the oven temperature:

1. Press

USER PREFERENCES

until you get to the UPO menu page.

2. To select the oven you want to adjust, press

USER PREFERENCES

again to toggle

between the upper and the lower display.

3. Enter the temperature by pressing the

+

hi

or

-

lo

pads. The temperature can only be

adjusted by ± 35°F.

4. Press

START

to accept the changes and go back to user preferences menu

display.

changing between 12 or 24 hour time of day display:

1. Press

USER PREF

until you get to the CLO 12hr menu page.

2 Press

-

lo

or

+

hi

to toggle the display of the clock in 12 or 24 hours.

3. Press

START

to accept the changes and go back to user preferences menu

display.

4. Remember to set your clock after changing the time of day display mode.

settinG tiMe of day disPlay — 12 oR 24 houRs

The oven control can be programmed to display time of day in 12 hours or 24 hours mode.

The oven has been preset at the factory to display in 12 hours mode.

changing clock display between on and off:

1. Press

USER PREF

until you get to the CLO on menu page.

2. Press

-

lo

or

+

hi

to toggle between displaying or hiding the clock.

3. Press

START

to accept the changes and go back to user preferences menu

display.

settinG clock disPlay — on oR off

The oven control can be programmed to display the time of day or not. The oven has been

preset at the factory to display the time of day.

Advertising