Telephone initialization process, Step 1: telephone to network – Avaya 1600 User Manual
Page 18
Administration Overview and Requirements
18 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Administrator Guide Release 1.0
Telephone Initialization Process
These steps offer a high-level description of the information exchanged when the telephone
initializes and registers. This description assumes that all equipment is properly administered
ahead of time. This description can help you understand how the 1600 Series IP Telephones
relate to the routers and servers in your network.
Step 1: Telephone to Network
The telephone is appropriately installed and powered. After a short initialization process, the
telephone identifies the LAN speed and sends a message out into the network, identifying itself
and requesting further information. A router on the network receives and relays this message to
the appropriate DHCP server if the phone IP address is 0.0.0.0.
Administer telephones
locally as applicable
As a Group:
The GROUP System Value
on
page 59 and the Avaya one-X™
Deskphone Value Edition 1600
IP Telephone Installation and
Maintenance Guide.
Individually:
The applicable Local
Procedures in the Avaya
one-X™ Deskphone Value
Edition 1600 IP Telephone
Installation and Maintenance
Guide.
Installation of
telephones in the
network
Avaya one-X™ Deskphone
Value Edition 1600 IP
Telephone Installation and
Maintenance Guide.
Allow user to modify
Options, if applicable
OPSTAT
on page 64 and the
respective User Guide for the
specific telephone model.
Table 2: Administrative Checklist (continued)
Task
Description
For More Information See:
2 of 2