Avaya 1600 - Manual (Page 42)

Server Administration
42 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Administrator Guide Release 1.0
In Table 5 , the 1600 Series IP Telephone sets the system values to the DHCPACK message
field values shown.
Windows NT 4.0 DHCP Server
Verifying the Installation of the DHCP Server
Use the following procedure to verify whether the DHCP server is installed.
1. Select Start-->Settings-->Control Panel.
2. Double-click the Network icon.
3. Verify that Microsoft DHCP Server is listed as one of the Network Services on the
Services tab.
4. If it is listed, continue with the next section. If it is not listed, install the DHCP server.
Table 5: DHCPACK Setting of System Values
System Value Set to
IPADD The yiaddr field.
NETMASK Option #1 (if received).
GIPADD Option #3 (if received, which might be a list of IP
addresses).
TLSSRVR The siaddr field, if that field is non-zero.
HTTPSRVR The siaddr field, if that field is non-zero.
DNSSRVR Option #6 (if received, which might be a list of IP
addresses).
DOMAIN Option #15 (if received).
DHCP lease time Option #51 (if received).
DHCP lease renew time Option #58 (if received).
DHCP lease rebind time Option #59 (if received).