ATD Tools ATD 37155 - Manual (Page 7)

7
RE WOUNDS.
l
Do not press gun trigger until instructed to do so.
l
Do not point gun toward any part of the body, other peo-
ple, or any metal when threading welding wire.
7.9. MOVING PARTS CAN CAUSE INJURY.
Moving parts, such as fans, can cut fingers and hands and
catch loose clothing.
l
Keep all doors, panels, covers, and guards closed and
securely in place.
l
Have only qualified people remove guards or covers for
maintenance and troubleshooting as necessary.
l
Keep hands, hair, loose clothing, and tools away from
moving parts.
l
Reinstall panels or guards and close doors when ser-
vicing is finished and before starting the machine.
7.10 NOISE
These power source alone do not produce noise
levels exceeding 80 dB. The welding procedure,
however, may produce noise levels in excess of
80 dB. in which case the machine operator must take the
necessary safety precautions as prescribed by the nation-
al safety regulation.