Operation tips, Cooling operation, Heating operation – Electrolux EXH12HL1WE User Manual

Page 13

Advertising
background image

ENGLISH 13

F2: Malfunction of evaporator

temperature sensor.

Check if the evaporator temperature sensor is

connected properly.

There is harsh sound during

operation.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Strong odours are emitted during

operation.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Water is leaking from the indoor

unit.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

The air switch or protection

switch often interrupts power

supply.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Water or other liquid is splashed

into the unit.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Mains cord and mains plug are

overheated.

Immediately stop operation, disconnect the

unit from the power supply and contact an

authorised service centre.

Cooling operation

Air conditioners absorb heat from indoor

and transmit the heat to the outdoor

unit in order to decrease the room

temperature. The cooling capacity will

increase or decrease according to the

outdoor temperature.
Anti-freezing function
If the unit is in COOL mode and in a

low ambient temperature, frost will be

formed on the heat exchanger of the

indoor unit. If the temperature of the

heat exchanger decreases below zero,

the compressor will stop operation to

protect the unit.

Heating operation

Air conditioners absorb heat from

outdoor and transmit the heat to the

indoor unit in order to increase the room

temperature. The heating capacity will

increase or decrease according to the

outdoor temperature.
Defrosting
• If the outdoor temperature is low and

the outdoor humidity is high, frost

will form on the outdoor unit during

extended operation. The heating

capacity will decrease. The unit may

stop operation during defrosting.

• During defrosting, the fan motors of

the indoor unit and outdoor unit will

stop operation.

• During defrosting, the indoor indicator

flashes and the outdoor unit may emit

vapour. This is normal operation to

remove frost from the heat exchanger

of the outdoor unit.

• After defrosting, the heating operation

will resume automatically.

OPERATION TIPS

Advertising