Agilent Technologies HP 16500 - Manual (Page 13)

To Verify the Installation
1 Check that "Ethernet" is available in the Communications menu of
the mainframe System Configuration menu.
When you power-up the mainframe, the Logic Analysis System performs the
power-up self-tests. After the self-tests are finished, the screen displays the
System Configuration menu. If the operating system finds an interface
module installed, then Ethernet is available in the Communications menu.
2 If "Ethernet" is not available in the Communications menu, go to
"Verifying the Interface Module Performance" in Chapter 3 of this
manual.
Verifying the Installation
Ethernet should be
listed here
Installing the Interface Module
To Verify the Installation
2–4