Nilfisk-ALTO BK 2.0 - Manual (Page 15)

14
AUDIO INPUT
AUDIO OUTPUT
COMPRESSOR
SECTION
GATE
SECTION
DYNAMIC
ENHANCER
SECTION
FUNCTION
SWITCHES
INDICATORS
POWER SUPPLY
DIMENSIONS
WEIGHT
6. TECHNICAL SPECIFICATIONS
Active balanced XLR and 1/4"JACK
60k ohm balanced
+21 dBu balanced and unbalanced
+21 dBu
XLR and 1/4" JACK
< 40k ohm unbalanced
20Hz to 20KHz at +0,- 1dB
0.05% tap.
0.01%
>-93dBu
>-97dBu
>-85dBu
>60dB
Interactive Compressor
Variable from - 40dB to +20dB
Variable from 1:1 to LIM
Attack variable from
0.1 to 200ms/20dB
Variable from 0.05ms to 4s/20dB
From - 20 to +20dB
Interactive Expander/Gate
Variable from OFF to +15dB
Dynamically controlled frequency
correction
Variable from off to 6
Bypass switch
Programme- dependent attack and
release time
Type
Impedance
Maximum input level
Type
Impedance
Maximum output level
Frequency response
THD +N% @ 1kHz, +4dBu
IMD (SMPTE) @+10dBu
Noise & Hum unity gain
Noise & Hum, fully off
Cross talk @ 20kHz
CMR @ 1kHz
Type
Threshold
Ratio
Attack
Release
Output level
Type
Threshold
Type
Process
Effect
Auto
CLOSE LED for the Expander/Gate
8 element red LED Gain Reduction meter
AUTO LED;Indicator for AUTO function and COMPRESSOR status
483(W) 44(H)mm
(19" 8.54" 1.7")
217(D)
3kg(6.62lb)
95-120V /210-240V ,60-50Hz